20mm Tweeter Set
Available in silver (shown) or black.
The Legatia™ L1v2 is a 20mm (3/4-inch) dome-type tweeter which has a very good linear
response and exceptional transient response. The design offers a wide dispersion pattern to make for flexible
installation and speaker location, and the phase linearity of the design ensures
phase coherent imaging and staging cues in the car audiophile system.
The L1
starts with an impregnated fine cloth silk dome diaphragm for a linear, smooth
sound, with a treated silk surround to damp edge modes and resonances. The L1 is efficient, exhibits low distortion, and has a wide dispersion;
the dome is of extremely low mass and has a relatively high power handling with
proper filtering.The
L1 dome design is much less susceptible to mechanical deformation than other
designs, and yet yields a smooth response over the extent of its range. The
motor assembly is conventional dynamic, with a very small neodymium magnet
structure to ensure a small footprint size and shallow depth. A perforated grille protects the dome. A 52mm wide plastic flange around the grille provides a location for four
3mm screws to be used to secure the drivers to the mounting surface, without the
necessity of mounting cups. The overall dimensions of the driver are very amenable for use in the car
audio environment, boasting a best-in-class depth of just 11mm, for the ultimate
in mounting flexibility. The terminations were left purposely small as well (~3mm), to give the
end user flexibility in low-temperature soldered options and crimp terminations,
without the additional depth concern of larger 6mm – 12mm spade terminals.
Legatia™ L1 Thiele-Small Parameters
|
|
Overall
diameter:
|
52mm
(2.1-inch)
|
|
Mounting
depth:
|
11mm
|
|
Bolt
Circle Diameter:
|
43mm
|
|
Mounting
hole:
|
35mm
|
|
Pnom
(without crossover)
|
7W
(AES Standard)
|
|
Pmax
(without crossover):
|
15W
|
|
Pmax
(w/ recommended crossover):
|
100W
|
|
Frequency
range:
|
3,000
– 20,000 Hz
|
|
Sensitivity:
|
89dB
(2.83V/1m)
|
|
Voice
coil diameter:
|
20mm
(3/4-inch)
|
|
Impedance:
|
8
Ohm
|
|
DC
Resistance:
|
6.8
Ohm
|
|
Fs:
|
2,500
Hz (free air)
|
Includes:
2-
L1 Tweeters
These
speakers are designed to be used with custom crossover designs. There are no
crossovers, grilles or mounting hardware included.
Legatia™ L1 Tweeter Details
|
 |
| Manufacturer |
Hybrid Audio Technologies |
| Unit |
|
| SKU |
L1v2 |
|
E-mail a friend about this item.
|
